Autel MaxiSys
Hardware + software system
Family of tablet-based multi-brand diagnostic scan tools for professional workshops.
MS906 Pro about $1,276–$1,554; MaxiSys Ultra about $5,695
0 followers 0 posts
Hardware / interface
Unverified
OP-COM
Also known as OP-COM V5 and OPCOM
USB interface and Windows software for Opel and Vauxhall diagnostics, adaptations and configuration beyond generic OBD-II.
Independent community profile — not affiliated with the manufacturer.
About OP-COM
OP-COM is a long-standing aftermarket diagnostic system for GM-era Opel and Vauxhall vehicles. Interfaces are sold with firmware versions such as 1.59, 1.70, 1.78, 1.95 and 1.99.
Supported vehicles
- Opel and Vauxhall models of the GM era, such as Astra G/H/J, Vectra B/C, Zafira A/B/C, Corsa C/D, Meriva and Insignia A.
- Version 1.70 is generally reported to work with cars up to about 2014. Support for 2015–2018 models (Astra K, Corsa E, Insignia B) is claimed only for newer versions and is unconfirmed.
- PSA-based Opels from 2017 onward are not covered.
What it can do
- Module-level codes and live data in most systems.
- Adaptations, configuration, service resets and output tests. Some versions also offer programming and immobiliser functions on older models.
Strengths
- Much deeper Opel access than generic scanners, at low cost.
Limitations
- Quality varies: a PIC18F458 and FTDI chipset is usually recommended.
- Never update the interface online, as this is known to disable clone units.
- English-only software.
OBD4 does not provide software, licences or downloads.
Capabilities & coverage
Key capabilities
- Adaptations
- Coding
- Live data
- Output tests
- Read & clear fault codes
- Service reset
Vehicle brands
Compatibility note: coverage listed here is a summary of community-submitted information that staff have not yet reviewed. It is not a guarantee for a specific vehicle, model year or software version. Always check the manufacturer's documentation.
Recent community activity
Ask about OP-COMNo publications about OP-COM yet
Share a problem, a guide, or your experience using it.
Write the first oneRelated and alternative tools
Lexia-3 PP2000
Hardware / interface
USB interface for PSA dealer software (Diagbox, Lexia and PP2000) on Peugeot and Citroën: diagnostics, configuration and telecoding.
0 followers 0 posts
XTOOL D7 V2.0
Hardware + software system
Cabled Android diagnostic tablet with all-system scanning, ECU coding on selected makes, active tests and about 36 service functions.
About $419 at US retail
0 followers 0 posts
XTOOL D7S V2.0
Hardware + software system
Android diagnostic tablet with all-system scanning, online ECU coding, active tests, 39+ service functions and built-in CAN FD and DoIP.
About $349 at XTOOL’s eBay store
0 followers 0 posts