Diagnostic software Unverified

OBD Auto Doctor

Also known as OBD Auto Doctor car scanner and OBDAutoDoctor

Generic OBD2/EOBD diagnostic software for Windows, macOS, Linux, iOS and Android using ELM327-based adapters: codes, freeze frame, readiness, live data, Mode $06/$08/$09. Free plan; Premium subscription.

By Creosys Ltd · Independent community profile — not affiliated with the manufacturer.

About OBD Auto Doctor

Overview

OBD Auto Doctor is a generic OBD2/EOBD diagnostic program from Creosys Ltd, a company based in Akaa, Finland. It runs on Windows, macOS and Linux computers and as an app on iPhone/iPad and Android. It talks to the car through an ELM327-based adapter that you buy separately.

It suits owners, DIY mechanics and anyone who wants the standard emissions-diagnostic data (fault codes, freeze frame, readiness, live sensors, Mode $06 test results) on a laptop as well as a phone. It is not a coding, adaptation or programming tool, and it does not offer manufacturer-level module access such as ABS, airbag or body control functions. If you need those, look at a brand-specific or professional tool instead.

Supported vehicles

  • Any OBD2/EOBD-compliant car, petrol or diesel. Only the standard OBD services are used, so what you see depends on what the car's engine and emissions control units support. The maker points out that every OBD2 feature also needs support from the vehicle.
  • Multiple control units: where a car reports OBD data from more than one ECU (for example engine and gearbox), the software shows them separately.
  • Mode $06 (on-board monitoring test results) is listed for CAN vehicles only.
  • There is no limit on the number of vehicles you can use it with.

Functions

All of these are standard OBD2 services, not manufacturer-specific functions.

Free plan

  • Confirmed (service $03), pending ($07) and permanent ($0A) fault codes, with an offline code database the maker says holds more than 18,000 codes
  • Fault code search, plus saving and sharing the diagnostic results
  • Readiness monitors, both since the last MIL reset and for the current drive cycle
  • ECU names and the OBD requirement the car was built to
  • Live sensors and a sensor graph, both limited in the free plan

Premium only

  • Freeze frame ($02), including multiple freeze frames
  • Clearing fault codes and switching off the check engine light ($04)
  • Manufacturer-specific fault codes
  • Oxygen sensor monitors ($05) and on-board diagnostic monitor test results ($06)
  • On-board service activation ($08): the maker lists the evap leak test, particulate filter regeneration and inducement system reinitialisation, where the car supports them
  • In-use performance tracking counters ($09)
  • VIN, calibration IDs (CALID), CVN, engine serial number and type approval number
  • Sensor logging and CSV export, sensor graph grid, histogram and graph image export
  • The troubleshooting console and data log for advanced users

The maker notes that not every feature exists in the mobile apps; some are only in the computer software.

What you need

  • An ELM327-based adapter. The maker says all ELM327-based interfaces are supported, recommends OBDLink (ScanTool.net) and Vgate models, and advises against clone adapters.
  • Matching the connection to your device:
    • Classic Bluetooth works on every platform except iPhone/iPad. For iPhone/iPad you need a Made-for-iPhone adapter; the maker names OBDLink MX+, vLinker FS and vLinker MS. OBDLink LX Bluetooth does not work with iPhone/iPad.
    • Bluetooth LE (Bluetooth 4.x or 5.x) works only with adapters the software specifically supports; a generic BLE adapter will not connect. Named models include OBDLink CX, vLinker MC+, iCar Pro 2S and LELink. LELink does not work with Windows, and the maker recommends classic Bluetooth over BLE on Windows.
    • Wi-Fi works on Windows, macOS, Android and iPhone/iPad. While connected to the adapter, the device cannot use another Wi-Fi network.
    • USB works on Windows and macOS only and may need a driver. The Android and iOS apps do not support USB adapters.
  • Operating system (version 5.4, August 2026): Windows 11 or Windows 10 64-bit; macOS 13 or newer, with a separate build for macOS 12. Older systems are limited to older builds: Windows 7, 8.1 and 32-bit Windows 10 to 4.5.4, and macOS 11 to 5.2.6. The current Linux release is 5.1.8, offered as a .deb for Ubuntu 24.04 LTS or later and as a generic x64 tar.gz.
  • An OBD Auto Doctor account to use a Premium subscription across devices. Sign-in with Apple or Google is supported.

Real cost

  • Free plan: the core code reading, readiness and limited live data listed above. You can download it free.
  • Premium: a subscription billed yearly or quarterly. The maker says yearly billing saves 50%. Premium unlocks every feature on all supported platforms, including future updates and email support. The pricing page shows the price in the buyer's local currency at checkout, so no single figure is given here.
  • Cancellation: there is no minimum contract. After you cancel, Premium stays active until the end of the billing period, and then the account drops back to the Free plan. You keep the free functions, but lose freeze frame, code clearing, Mode $05/$06/$08/$09, logging and export.
  • Adapter: bought separately. The maker's adapter page groups the recommended models from low to upper price bands.

Getting started

  1. Pick an adapter that matches your device and connection type from the maker's adapter list. This is especially important for iPhone/iPad and for Bluetooth LE.
  2. Install the app from the App Store or Google Play, or download the computer version from the maker's site.
  3. Plug the adapter into the car's OBD port, switch on the ignition, pair or connect the adapter, and then connect from the software.
  4. If a Bluetooth adapter will not connect the first time, update to the latest version first. The 4.5 release fixed first-time Bluetooth connections, and on the Mac it restored classic Bluetooth on macOS Monterey, Ventura and Sonoma.
  5. If a cheap adapter misbehaves, the maker's advice is to use one of its recommended adapters rather than a clone.

Strengths and limitations

Strengths

  • One subscription covers computers (Windows, macOS, Linux) and phones (iOS, Android).
  • USB adapters work on Windows and macOS, which helps if wireless connections are unreliable.
  • Goes deeper into standard OBD than basic code readers: Mode $05, $06, $08 and $09, multiple freeze frames, CVN and calibration IDs.
  • A long, public release history going back to version 3.0 in 2015, with separate release notes for each platform.

Limitations

  • Generic OBD only: no coding, adaptations, service resets, key programming or access to non-emissions modules.
  • Clearing codes and reading freeze frame need Premium.
  • Premium is a subscription only; the current pricing page offers no one-time purchase.
  • The Linux version lags behind: it is at 5.1, while Windows and macOS are at 5.4.
  • Generic Bluetooth LE adapters are not supported, and the iPhone/iPad app needs a Made-for-iPhone, Bluetooth LE or Wi-Fi adapter.

How it compares

  • Car Scanner ELM OBD2 is a phone and tablet app with no USB support, and it adds coding on a published list of models. OBD Auto Doctor runs natively on Windows, macOS and Linux computers as well as phones, but has no coding.
  • Carista OBD2 and BimmerCode are built around brand-specific coding and customisation. OBD Auto Doctor stays with the standard OBD2 services.
  • Like those apps, it relies on an ELM327-compatible adapter such as the OBDLink or Vgate models in this catalogue, rather than shipping its own hardware.

Versions

The computer and mobile apps use separate version numbers. The versions listed on this page are the Windows/macOS/Linux releases, from the maker's release notes. At the same time, the iOS and Android apps had reached 8.4.

Sources for this profile

Parts of this profile were written by an AI agent from the sources below and have not been checked by staff. Last updated 16 Nov 2026.

Hardware you need

Interfaces that connect OBD Auto Doctor to the car. Official means required or supplied by the software maker.

Interface / hardware Status Price Notes
ELM327 Official — The maker says all ELM327-based interfaces are supported, and advises against clones. Source ↗
OBDLink MX+ Supported About $130–$140 (launched at $99.95 in 2018) Recommended; classic Bluetooth on Windows, macOS, Android and iPhone/iPad (the maker names the MX+). Source ↗
OBDLink CX Supported About $80 Recommended Bluetooth 5 LE adapter for Windows, macOS, Android and iPhone/iPad. Source ↗
OBDLink EX Supported About $60–$70 Recommended USB adapter; USB works on Windows and macOS only. Source ↗
Vgate vLinker FS Supported About $31 (USB) at Vgate’s store Recommended; Bluetooth works on all platforms including iPhone/iPad, and a USB version is listed for computers. Source ↗
Vgate vLinker MC+ Supported About $50 at Vgate’s store Recommended dual classic Bluetooth/BLE adapter for all platforms. Source ↗
Vgate iCar Pro 2S Supported About $29 at Vgate’s store Recommended low-cost dual classic Bluetooth/BLE adapter for all platforms. Source ↗
Vgate iCar Pro Supported — The Wi-Fi version is listed for Windows, macOS, Android and iPhone/iPad. Source ↗
Vgate iCar2 Supported About €25 on eBay The Wi-Fi version is listed for Windows, macOS, Android and iPhone/iPad. Source ↗

Capabilities & coverage

Key capabilities

  • Live data
  • Read & clear fault codes

Vehicle brands

Compatibility note: coverage listed here is a summary of community-submitted information that staff have not yet reviewed. It is not a guarantee for a specific vehicle, model year or software version. Always check the manufacturer's documentation.

Recent community activity

Ask about OBD Auto Doctor

Car Scanner ELM OBD2

Mobile app

Free iOS and Android OBD app for wireless ELM327 adapters: codes, live data and dashboards on any OBD-II car, plus coding on listed VAG, Toyota and Renault models.

Free with ads. Pro on the US App Store: lifetime $7.99, 1 year $4.99, 6 months $3.99; licence tied to one app store

0 followers 2 posts Active

Carista OBD2

Mobile app

iOS and Android app that uses a Bluetooth OBD2 scanner to customise hidden settings, read faults, run service resets and show live data. Covers 34 brands; most functions need a Pro subscription.

Free app; Pro subscription for advanced features. UK App Store in-app purchases range from £12.99 to £59.99, including 1-month Pro £19.99 and 3-month Pro £29.99. Prices vary by region.

0 followers 1 post Active

Carly

Mobile app

Subscription phone app and universal adapter for diagnostics, coding and used-car checks across many brands.

Adapter about €60–€80 plus about €50–€100 a year; All Brands listed at €73.99 on Apple’s German store

0 followers 0 posts

Smart Control OBD2

Mobile app

Android app that reads fault codes and live data from OBD2/EOBD cars through a Bluetooth or Wi-Fi ELM327-type adapter.

Free version; Full is a one-time purchase on Google Play (price shown in the store)

0 followers 0 posts