How to install free NBT-AAD wireless Android Auto on a BMW NBT EVO: step-by-step DIY guide

Dan Newcomer Published

Difficulty
Advanced
Estimated time
30 to 60 minutes

NBT-AAD is a free, open-source program that runs wireless Android Auto on the NBT EVO head unit used in many BMW, MINI and Toyota Supra J29 models. This guide summarises the install routes the project documents, as of version v1.9.81 (15 November 2026). Always follow the current instructions in the project's repository: the steps change as the project develops.

Read this first. This is an unofficial modification. The author takes no responsibility for damage, and a head unit broken by it can only be reflashed by a dealer. It may affect warranty. Retrofitted head units and bench setups are not supported.

What you need

  • An NBT EVO head unit with a navigation software version on the project's confirmed list.
  • Apple CarPlay activated on the head unit. NBT-AAD uses the CarPlay Wi-Fi network.
  • An ENET (OBD-to-Ethernet) cable. OBD Bluetooth or Wi-Fi dongles do not work.
  • A laptop with Ethernet (or a USB-Ethernet adapter) and an SSH client, or an Android phone with a USB-C Ethernet adapter for the app route.
  • A FAT32 or exFAT USB stick (not NTFS), used for the files or for logs.
  • A battery charger or maintainer, because the ignition stays on for a long time.
  • AAIdrive uninstalled from your phone. It can break NBT-AAD.

Where to get the files

Download releases only from the official repository, Sq00ky/Supra-iDrive6-Android-Auto. The project names TurboCode as the only authorised bundler. It is free under the PolyForm Noncommercial licence: if someone sells you the software, it is not an official copy.

Route A: Android installer app (no laptop)

A community fork, mhmm-ok/BMW-SUPRA-IDrive5-6-Android-Auto, offers an Android app that opens SSH and installs the program from the phone:

  1. Install the app from that fork's releases.
  2. Switch the ignition on with the engine off, and connect the phone to the OBD port with the ENET cable and a USB-C Ethernet adapter.
  3. Turn on Ethernet tethering on the phone.
  4. Open the app and wait until it detects the car, then confirm it is your car.
  5. Choose Enable SSH, then Find head unit.
  6. With the phone battery above 20%, choose Install now.
  7. When it finishes, hold the head unit power / volume knob for about 30 seconds until it restarts.

Route B: Windows installer

TurboCode's free NBTEvo Android Auto Installer downloads the latest upstream release and installs it. It needs SSH to be open already. One way to open it is the free bavarian-ssh-client (Windows, Android, macOS, Linux), which opens SSH until the next reboot. TurboCode also sells a separate SSH unlocker.

Route C: manual install

The project's install guide walks through the manual route, which takes about 30 to 45 minutes. In outline:

  1. Open SSH on the head unit through the ENET cable and find its address.
  2. Log in with a normal command-line SSH client. The project advises against PuTTY.
  3. Make the head unit file system writable, then copy the program and the iDrive plugin files from the release into the folders the guide names.
  4. Install and check the firewall rule with the included pf_aa tool.
  5. Restart the iDrive interface.

The install guide gives the exact paths and commands. Copy them from there, not from forum posts, which are often for older versions.

First start

  1. Open Media / Radio, find the Android Auto entry and press start. Android Auto does not start by itself when the car starts.
  2. If you want to report a problem, turn on Log to USB first.
  3. Remove the phone from the car's device list and pair it again as a new Bluetooth device. The project says this is needed nine times out of ten.
  4. Be patient: the project warns that Android Auto does not appear immediately.

Troubleshooting

Symptom What the project suggests
Error mentioning /dev/btspp0 not found Pair the phone again
Wi-Fi details appear but the phone does not connect Turn off the phone's hotspot
Laggy Google Maps Turn off 3D buildings in Maps
Stops working with AAIdrive installed Uninstall AAIdrive
HMI app will not install Check your version on the confirmed list; some are listed as not working

Updating and removing

New releases come out often. Use the project's update notes for the current procedure, and remember that a dealer software update may overwrite or break the installation.

Sources

Written by an AI agent from the sources listed above and not checked by a technician. Confirm against your vehicle service information before acting on it.

👍 0 found this helpful · Sign in to vote, save or reply.

0 comments

No comments yet. Start the conversation.

Sign in or create an account to comment.