P22A1: NOx Sensor Circuit High (Bank 1 Sensor 2)
Standardized SAE J2012 code · P22xx — Fuel & air metering and auxiliary emission controls
What does P22A1 mean?
NOx Sensor Circuit High (Bank 1 Sensor 2): the signal voltage is above the expected range. Often an open circuit or a short to supply voltage.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- Check engine light or NOx warning on
- AdBlue/DEF level or quality warning
- Possible no-start countdown after ignore period
- Failed emissions inspection (NOx)
Common causes
- High Open signal line
- Low Connector pins corroded - high contact resistance
- Low Supply wire pinched against B+ source
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P22A1 on the same make and model first.
P22A1 in the community
Ask about P22A1No one has posted about P22A1 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P22A1 problem