P22A0: NOx Sensor Circuit Low (Bank 1 Sensor 2)
Standardized SAE J2012 code · P22xx — Fuel & air metering and auxiliary emission controls
What does P22A0 mean?
NOx Sensor Circuit Low (Bank 1 Sensor 2): the signal voltage is below the expected range. Often a short to ground or high resistance in the wiring.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- Check engine light or NOx warning on
- AdBlue/DEF level or quality warning
- Possible no-start countdown after ignore period
- Failed emissions inspection (NOx)
Common causes
- High Short to ground
- Low Connector pins corroded - high contact resistance
- Low Harness chafing through insulation
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P22A0 on the same make and model first.
P22A0 in the community
Ask about P22A0No one has posted about P22A0 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P22A0 problem