Powertrain
Definition only
Lights the check engine lamp
P2094: B Camshaft Position Actuator Control Circuit Low (Bank 2)
Standardized SAE J2012 code · P20xx — Fuel & air metering and auxiliary emission controls
What does P2094 mean?
The exhaust (B) camshaft phaser solenoid drive line on bank 2 is stuck low — short to ground or stuck-low driver.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- Check engine light on
- Power loss especially in mid-rpm range
- Possible rough idle or stalling
- Increased fuel consumption
Common causes
- High Short to ground
- Low Connector pins corroded - high contact resistance
- Low Harness chafing through insulation
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P2094 on the same make and model first.
P2094 in the community
Ask about P2094No one has posted about P2094 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P2094 problem