P2014: Intake Manifold Runner Position Sensor/Switch Circuit (Bank 1)
Standardized SAE J2012 code · P20xx — Fuel & air metering and auxiliary emission controls
What does P2014 mean?
The position feedback signal of the IMRC flap on bank 1 is missing or implausible. Without feedback, the ECU cannot verify that the commanded runner position has been reached.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Common causes
- High Position sensor failed
- Medium Signal wire broken
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P2014 on the same make and model first.
P2014 in the community
Ask about P2014No one has posted about P2014 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P2014 problem