P2013: Intake Manifold Runner Control Circuit High (Bank 2)
Standardized SAE J2012 code · P20xx — Fuel & air metering and auxiliary emission controls
What does P2013 mean?
The IMRC actuator drive line on bank 2 reads above the expected voltage threshold — typically a short to battery voltage or an open ground side.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Common causes
- High Short to B+ in driver line
- Medium Open ground return on actuator
- Low Connector pins corroded - high contact resistance
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P2013 on the same make and model first.
P2013 in the community
Ask about P2013No one has posted about P2013 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P2013 problem