U047A: Invalid Data Received From Restraints System Sensor J
Standardized SAE J2012 code · U04xx — Invalid data received
What does U047A mean?
A receiving module detected implausible data from restraints system sensor J (satellite crash sensor). Acceleration profile values fail plausibility checks against other crash sensors and are rejected.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Common causes
- High Module internal fault or sensor input drift
- Medium Software version mismatch after replacement
- Low Gateway module routing CAN messages incorrectly
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of U047A on the same make and model first.
U047A in the community
Ask about U047ANo one has posted about U047A yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your U047A problemRelated codes
- U0471 Invalid Data Received From Restraints System Sensor A
- U0472 Invalid Data Received From Restraints System Sensor B
- U0473 Invalid Data Received From Restraints System Sensor C
- U0474 Invalid Data Received From Restraints System Sensor D
- U0475 Invalid Data Received From Restraints System Sensor E
- U0477 Invalid Data Received From Restraints System Sensor G
- U0478 Invalid Data Received From Restraints System Sensor H
- U0479 Invalid Data Received From Restraints System Sensor I
- U047B Invalid Data Received From Restraints System Sensor K
- U047C Invalid Data Received From Restraints System Sensor L
- U047D Invalid Data Received From Restraints System Sensor M
- U047E Invalid Data Received From Restraints System Sensor N