U01A5: Lost Communication With Hybrid/EV Battery Interface Control Module F
Standardized SAE J2012 code · U01xx — Lost communication with modules
What does U01A5 mean?
ECU lost CAN communication with hybrid/EV HV battery interface module F (BMS slave or cell-monitoring submodule).
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Common causes
- High Module unpowered
- Low Gateway module routing CAN messages incorrectly
- Low CAN terminating resistor (120 Ω) drifted out of spec
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of U01A5 on the same make and model first.
U01A5 in the community
Ask about U01A5No one has posted about U01A5 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your U01A5 problemRelated codes
- U01A0 Lost Communication With Hybrid/EV Battery Interface Control Module A
- U01A1 Lost Communication With Hybrid/EV Battery Interface Control Module B
- U01A2 Lost Communication With Hybrid/EV Battery Interface Control Module C
- U01A3 Lost Communication With Hybrid/EV Battery Interface Control Module D
- U01A4 Lost Communication With Hybrid/EV Battery Interface Control Module E
- U01A6 Lost Communication With Hybrid/EV Battery Interface Control Module G
- U01A7 Lost Communication With Hybrid/EV Battery Interface Control Module H
- U01A8 Lost Communication With Hybrid/EV Battery Interface Control Module I
- U01A9 Lost Communication With Hybrid/EV Battery Interface Control Module J
- U01AA Lost Communication With Hybrid/EV Battery Interface Control Module K
- U01AB Lost Communication With Hybrid/EV Battery Interface Control Module L
- U01AC Lost Communication With Hybrid/EV Battery Interface Control Module M