Powertrain
Definition only
Lights the check engine lamp
P2E4D: Battery Charger Coupler Temperature Sensor C Circuit High
Standardized SAE J2012 code · P2Exx codes
What does P2E4D mean?
The ECM detects a circuit high fault on the battery charger coupler temperature sensor c circuit. Reading cannot be used reliably for control.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- Charge status indicator shows fault
- Charging may not start or interrupts
- Slower-than-expected charge rate
Common causes
- High Signal wire shorted to B+
- Medium Open sensor
- Low Connector pins corroded - high contact resistance
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P2E4D on the same make and model first.
P2E4D in the community
Ask about P2E4DNo one has posted about P2E4D yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P2E4D problem