Powertrain
Definition only
Lights the check engine lamp
P2C93: Hybrid/EV Battery Contactor Control Supply Circuit Range/Performance
Standardized SAE J2012 code · P2Cxx codes
What does P2C93 mean?
The supply circuit for the hybrid battery contactor control reports a range/performance condition. Contactor coils may not energise as expected.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- EV/hybrid system warning light on
- Reduced power output or limp mode
- Charging may fail or be slowed
- Reduced electric range
Common causes
- High Supply voltage drift outside calibration
- Medium High-resistance contact in connector
- Low Sensor element aged beyond calibration window
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P2C93 on the same make and model first.
P2C93 in the community
Ask about P2C93No one has posted about P2C93 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P2C93 problem