Powertrain
Definition only
Lights the check engine lamp
P2862: Shift Fork B Actuator Circuit High
Standardized SAE J2012 code · P28xx codes
What does P2862 mean?
The control circuit for shift fork B actuator reports a actuator circuit high condition. Fork engagement cannot be commanded reliably.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Common causes
- High Control wire shorted to B+
- Medium Open actuator coil
- Low Connector pins corroded - high contact resistance
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P2862 on the same make and model first.
P2862 in the community
Ask about P2862No one has posted about P2862 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P2862 problem