Powertrain
Definition only
Lights the check engine lamp
P2842: Shift Fork D Position Circuit Low
Standardized SAE J2012 code · P28xx codes
What does P2842 mean?
Voltage on shift fork D position sensor signal line is below the expected window. Wire shorted to ground or sensor short.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Common causes
- High Signal wire shorted to ground
- Medium Internal sensor short
- Low Connector pins corroded - high contact resistance
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P2842 on the same make and model first.
P2842 in the community
Ask about P2842No one has posted about P2842 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P2842 problem