P2666: Fuel Shutoff Valve B Control Circuit Low
Standardized SAE J2012 code · P26xx — Computer and output circuits
What does P2666 mean?
Voltage on the secondary fuel shutoff valve control line is below the expected window. Usually a short to ground or a shorted solenoid coil.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Common causes
- High Control wire shorted to ground
- Medium Internal short in solenoid coil
- Low Connector pins corroded - high contact resistance
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P2666 on the same make and model first.
P2666 in the community
Ask about P2666No one has posted about P2666 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P2666 problem