Powertrain
Definition only
Lights the check engine lamp
P2664: B Rocker Arm Actuator Control Circuit High Bank 2
Standardized SAE J2012 code · P26xx — Computer and output circuits
What does P2664 mean?
Voltage on the rocker arm actuator B control line on bank 2 is above the expected window. Typical causes are a short to battery or an open solenoid coil.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Common causes
- High Control wire shorted to B+
- Medium Open solenoid coil
- Low Connector pins corroded - high contact resistance
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P2664 on the same make and model first.
P2664 in the community
Ask about P2664No one has posted about P2664 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P2664 problem