Powertrain
Definition only
Lights the check engine lamp
P2630: O2 Sensor Pumping Current Trim Circuit Low Bank 2 Sensor 1
Standardized SAE J2012 code · P26xx — Computer and output circuits
What does P2630 mean?
The wide-band trim resistor circuit on bank 2 sensor 1 reads low. Air-fuel feedback gain on bank 2 is wrong, causing rich or lean offsets.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- Check engine light on
- Increased fuel consumption
- Possible rough idle or hesitation
- Failed emissions test
Common causes
- High Short in the calibration trim resistor
- Medium Water intrusion in the sensor connector
- Low Connector pins corroded - high contact resistance
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P2630 on the same make and model first.
P2630 in the community
Ask about P2630No one has posted about P2630 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P2630 problem