P22AE: O2 Sensor Reference Voltage Circuit/Open (Bank 1 Sensor 2)
Standardized SAE J2012 code · P22xx — Fuel & air metering and auxiliary emission controls
What does P22AE mean?
The reference voltage line for the wide-band O2 sensor on bank 1 sensor 2 is open. The reference is used as the floating mid-point for the pumping cell.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- Check engine light on
- Increased fuel consumption
- Possible rough idle or hesitation
- Failed emissions test
Common causes
- High Open reference voltage line
- Low Pin pushed back out of connector body
- Low Cracked solder joint inside the module or sensor
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P22AE on the same make and model first.
P22AE in the community
Ask about P22AENo one has posted about P22AE yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P22AE problem