P20BF: Reductant Heater B Control Circuit Low
Standardized SAE J2012 code · P20xx — Fuel & air metering and auxiliary emission controls
What does P20BF mean?
Reductant heater B control line stuck low — short to ground. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- Check engine light or NOx warning on
- AdBlue/DEF level or quality warning
- Possible no-start countdown after ignore period
- Failed emissions inspection (NOx)
Common causes
- High Short to ground
- Low Connector pins corroded - high contact resistance
- Low Harness chafing through insulation
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of P20BF on the same make and model first.
P20BF in the community
Ask about P20BFNo one has posted about P20BF yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your P20BF problem