C0639: Brake Pressure Sensor H Circuit/Open
Standardized SAE J2012 code · C06xx codes
Safety-critical system. Faults in airbags, brakes, steering or high-voltage components can put people at risk. Follow the manufacturer's service information and safety procedures, or have the vehicle checked by a qualified workshop.
What does C0639 mean?
Open circuit on brake pressure sensor H.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Common causes
- High Wire broken
- Low Pin pushed back out of connector body
- Low Cracked solder joint inside the module or sensor
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of C0639 on the same make and model first.
C0639 in the community
Ask about C0639No one has posted about C0639 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your C0639 problemRelated codes
- C0544 Brake Pressure Sensor B Circuit/Open
- C05A1 Brake Pressure Sensor E Circuit/Open
- C05C8 Brake Pressure Sensor F Circuit/Open
- C0635 Brake Pressure Sensor G Circuit/Open
- C063D Brake Pressure Sensor J Circuit/Open
- C0641 Brake Pressure Sensor K Circuit/Open
- C0645 Brake Pressure Sensor L Circuit/Open
- C0649 Brake Pressure Sensor M Circuit/Open
- C064D Brake Pressure Sensor N Circuit/Open