C052D: ABS Pump Motor Control Circuit High
Standardized SAE J2012 code · C05xx codes
Safety-critical system. Faults in airbags, brakes, steering or high-voltage components can put people at risk. Follow the manufacturer's service information and safety procedures, or have the vehicle checked by a qualified workshop.
What does C052D mean?
ABS pump motor control voltage above expected range. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Common causes
- High Wiring shorted to battery
- Low Connector pins corroded - high contact resistance
- Low Supply wire pinched against B+ source
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of C052D on the same make and model first.
C052D in the community
Ask about C052DNo one has posted about C052D yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your C052D problem