C0200: ABS Solenoid Valve Front Left Circuit
Standardized SAE J2012 code · C02xx codes
Safety-critical system. Faults in airbags, brakes, steering or high-voltage components can put people at risk. Follow the manufacturer's service information and safety procedures, or have the vehicle checked by a qualified workshop.
What does C0200 mean?
The ABS control module detects a fault in the inlet/outlet solenoid for the front left brake circuit. The valve is integrated in the hydraulic block; replacement is generally a workshop task.
The code tells you which monitor failed, not which part is broken. Test before replacing parts.
Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Common causes
- High Solenoid coil open
- Medium Internal short to ground in valve block
Likelihood is a general estimate across vehicles; your make and model may differ.
Add your car to see reports of C0200 on the same make and model first.
C0200 in the community
Ask about C0200No one has posted about C0200 yet
Share your vehicle, the tool you used and what you tested — the first thread helps everyone who searches for this code.
Describe your C0200 problem